IHC Suspension | 1988-1998 C1500 3″ FRONT LOWERING CONTROL ARMS

IHC Suspension is excited to introduce the most complete 1988-1998 C1500 3″ Lowering Control Arms on the market. IHC’s kit has all the features that most of our competitors just do not have.

Our key features that differentiate us from the competition:

• Kill 2 birds with 1 stone. You are lowering the truck and replacing your 25+ year old ball joints and bushings with IHC control arms.
• IHC’s control arm have track width reduced ¾” to allow more tire to fender clearance for turning. Giving the customer more wheel and tire options. Most spindles pop out factory track width ½ to ¾”.
• IHC’s control arms run polyurethane bushings for maximum performance, extended bushing life, and minimal maintenance.
• All MADE IN USA! Manufactured in TEXAS!
• Lifetime warranty on all metal parts!

IHC’s 1988-1998 C1500 3″ Lowering Control Arms consist of 3″ lowering control arms (uppers and lowers), new ball joints, and shorter sway bar links. If wanting to lower the truck more than 3″ inches up front, you will need to use our 1988-1998 C1500 2″ Front Lowering Coil Springs W/ 1″ Isolator. All IHC Suspension parts are fiber laser cut, CNC-bent, and robotically welded for precise quality. This product can be used in conjunction with the following products:

• 1988-1998 C1500 5″ REAR LOWERING KIT W/ BOLT ON C-NOTCH or 1988-1998 C1500 5″ REAR LOWERING KIT W/ WELD ON C-NOTCH to achieve a 3/5 drop
• 1988-1998 C1500 6″ REAR LOWERING KIT W/ BOLT ON C-NOTCH or 1988-1998 C1500 6″ REAR LOWERING KIT W/ WELD ON C-NOTCH along with our springs (link listed above) to achieve a 4/6 drop
• 1988-1998 C1500 7″ REAR LOWERING KIT W/ BOLT ON C-NOTCH or 1988-1998 C1500 7″ REAR LOWERING KIT W/ WELD ON C-NOTCH along with our springs (link listed above) to achieve a 5/7 drop